Full automatic 20-25L plastic drum blow molding machine with robot
Model No.: KPM80(single station single die head)
KPM80 extrusion blow moulding machine was specially designed for
making plastic water tanks,plastic cans, lubricant oil
bottles,plastic drums, plastic toys and other plastic containers
not over 25L.
The features of this machine:
(1) It is suitable for producing PE,HDPE,PP, PVC so on,plastic
containers and bottles in all shapes are available,the max.product
volume is up to 25L.
(2) Single station single die head design,very easy to operate and
(3) Most components of the blow moulding machine are from famous
(4) Fully automatic process with low power consumption,high
efficiency,quick and safe operation,easy for maintenance.
(5) Accumulation die head,MOOG parison controller equipped.
(6) Bottom blow technology make the product perfect.
(7) Auto lubricant system controlled by PLC.
Technical Parameters: ( KPM80)
|Max. Product volume||25 liters|
|Screw L/D ratio||25 L/D|
|Screw drive power||30 KW|
|Screw heating capacity||16 KW|
|No.of heating zone||4 zones|
|Output of HDPE||100 KG/H|
|Oil pump drive power||22 KW|
|Clamping force||210 KN|
|Max.size of mold||550X650mm|
|Die heating power||5.3 KW|
|Die heating segments||4 zones|
|Air volume||0.8 M³/MIN|
|Cooling water pressure||0.3mpa|
|Water consumption||60 L/MIN|