50L Oil drum blow molding machine manufacturer 30-40pcs/h output
Model No.: KPM90(single station single die head)
KPM90 plastic drum making machine was specially designed for making
plastic water tanks,plastic cans, lubricant oil bottles,plastic
drums, plastic toys,tool boxes and other plastic containers not
The features of this machine:
(1) It is suitable for producing PE,HDPE,PP, PVC so on,plastic
containers and bottles in all shapes are available,the max.product
volume is up to 50L.
(2) Single station single die head design,very easy to operate and
(3) Most components of the blow moulding machine are from famous
(4) Fully automatic process with low power consumption,high
efficiency,quick and safe operation,easy for maintenance.
(5) Accumulation die head,MOOG parison controller equipped.
(6) Bottom blow technology make the product perfect.
(7) Auto lubricant system controlled by PLC.
Technical Parameters: (KPM90 )
|Max. Product volume||60 liters|
|Screw L/D ratio||25 L/D|
|Screw drive power||37 KW|
|Screw heating capacity||18 KW|
|No.of heating zone||4 zones|
|Output of HDPE||150 KG/H|
|Oil pump drive power||15 KW|
|Clamping force||320 KN|
|Max.size of mold||700X1200mm|
|Die heating power||18 KW|
|Die heating segments||4 zones|
|Air volume||1.0 M³/MIN|
|Cooling water pressure||0.3mpa|
|Water consumption||90 L/MIN|
|Size of machine||5.2x2.2x4.6m|
|Weight of machine||13.5Ton|