Full automatic 1-5L engine oil HDPE bottle blow molding machine
Model No.: KPM75Ⅱ(Double station single die head)
KPM75Ⅱ5L PE blow moulding machine was specially designed for making
plastic water bottles, lubricant oil bottles,detergent bottles
,cosmetic bottles, and other plastic containers not over 8L.
The features of this machine:
(1) It is suitable for producing PE,HDPE,PP, PVC,PETG,PS so
on,plastic containers and bottles in all shapes are available,the
max.product volume is up to 7.5L.
(2) Double station single die head design,Stable and efficient.
(3) Most components of the blow moulding machine are from famous
(4) Fully automatic process with low power consumption,high
efficiency,quick and safe operation,easy for maintenance.
(5) Multiple screw available for double layer or tranparent liquid
(6) Auto deflashing device available,can remove the extra parts of
(7) Auto lubricant system controlled by PLC.
Technical Parameters: ( KPM75Ⅱ )
|Max. Product volume||8 liters|
|Screw L/D ratio||24 L/D|
|Screw drive power||22 KW|
|Screw heating capacity||7 KW|
|No.of heating zone||4 zones|
|Output of HDPE||100KG/H|
|Oil pump drive power||7.5KW|
|Max.size of mold||170-520mm|
|Mold stroke||400 X 420mm|
|Blowing pressure||0.6 mpa|
|Air Volume||0.8 M³/MIN|
|Cooling water pressure||0.3mpa|
|Water consumption||80 L/MIN|