250KG per hour output PVC corner bead extrusion line with factory
1. PVC corner bead extrusion line introduction:
PVC corner profile production line is used to produce PVC corner.
This machine Can produce 1 - 6 corners at the same time, after
extrusion the PVC corner, there is a punching Machine, it is used
to punch hole on the PVC corner. The punching machine is our new
design, it is full automatic line.
As the machine specially design for PVC material, so just change
the die head, add an cutter, then this line can be used to produce
other PVC profiles, like PVC ceiling panel, windows profile, door
2. PVC corner bead extrusion line advantage:
1. Our PVC Corner Bead Extrusion Machine has features of low
consumption, low noise, stable running.
2. This PVC Corner Bead Extrusion Machine include:
extruder,mould,vacuum calibration table, haul-off machine, puching
machine, cutter and stacker.
3. The extruder adopt special twin screw and barrel for extrusion.
With different mould, it can produce different shapes.
3. PVC corner bead extrusion line technical parameter:
|Main extruder||SJZ65/132 conical double screw extruder|
|main motor||XIEMENS BEIDE motor, ABB inverter|
|mould typle||6 cavities|
|Installation size||24M * 2M * 3M|
|Main electic parts||SIEMENS, SCHNEIDER|
|Screw material||38CrMoAlA Bi-metallic|
4. PVC corner bead extrusion line reference pictures:
PVC corner bead extrusion line testing in BENK's factory
Vacuum calibrator table
Haul-off hauling rubber design same shap as the corner bead.
Main applications for PVC profile Extrusion Line:
This pvc profile Extrusion Line machine is composed of cone twin
screw extruder, vacuum calibration tank, haul-off, cutter, stacker,
and also coordinated with different profile break-section and mould
to produce PVC door&window profile,indoor floor, decoration
plate material, profile and multi-hole wire plastic products etc.
our machine has following features:
green environment protection, waterproof, dampproof,
anti-corrosion, rot-resistence, ametabolic and good fire-retardant.
Also, Wood Plastic Machine WPC Machine can be used after recycling,
and has been widely used in fields of floor, guard bar, tray,
packing cases, partition board, window and door sheath, skirting
Main technical parameter:
|Section bar width(mm)||180||240||700||1000|
|Length of vacuum calibration tank(mm)||2500||6000||6000||8000|
|Degree of vacuum(Map)||-0.08-0.09||-0.08-0.09||-0.08-0.09||-0.08-0.09|
|Cutting saw diameter(mm)||400||450||300||320|
|Length of line(m)||20||25||35||45|
If need more inforamtion, please feel free contact us.